Ram ProMaster (VF) – Maintenance Light (Wrench Light) in EVIC
SUMMARY The Ram ProMaster is equipped with a service maintenance light (wrench light) in the EVIC. This light is different from the oil maintenance light, and is used to notify customers they have...
View ArticleRam ProMaster (VF) – microPod II Only
SUMMARY The only supported VCI device on the Ram ProMaster (VF) is the microPod II. This is because of the unique electrical architecture of the ProMaster. If the wrong device is used, wiTECH will...
View ArticleFIAT 500L (BF) - Programming a Key
Summary: Key programming on the FIAT 500L (BF) requires a 5-digit key code unique to the vehicle VIN. The 5-digit key code can only be obtained from DealerCONNECT by authorized...
View ArticleBasic Wireless Networking: Laptop Configuration for Windows 7
Laptop configuration can be as simple as a scan of available wireless networks and connecting to it. It may also require a manually created profile for a secure, non-broadcasting wireless network. You...
View ArticleHow to download and install the new National Instruments drivers for...
The National Instruments drivers have been upgraded in order to comply with Windows 7 (32 bit/64 bit) and Windows 8 Operating Systems. Before being installing the new National Instruments drivers,...
View ArticleRelease Notes - TechTOOLS upgrade for Windows 7 (32 bit/64 bit) and Windows 8...
TechTOOLS application software and National Instruments drivers have been upgraded to work on Windows 7 32bit/64 bit and Windows 8 operating systems. Here is the list of changes/updates we have...
View Article2014 KL (Cherokee) IPC (Instrument Panel Cluster) Flash Abort-Recovery Process
Vehicle: 2014 KL (Cherokee) ECU: IPC (Instrument Panel Cluster) Potential Issue: IPC Electronic Control Unit (ECU) flash process is aborted (interrupted). If the flash of this IPC ECU is aborted,...
View ArticleThe wiTECH Premium Support Help Desk for Aftermarket & Fleet Customers
The wiTECH Premium Support Help Desk supports the Chrysler wiTECH Diagnostic System. New to wiTECH For information about wiTECH visit our Knowledgebase FAQ at http://kb.dcctools.com To create an...
View ArticleFlashing red light on VCI Pods and MicroPODs
Description: With previous versions of the wiTECH application if your laptop either lost network connection or powered down unexpectedly during the flash process you would be forced to initiate the...
View Article2011 JC/JF/LD/LX (Journey/Charger/300) Hands-Free Module (HFM) Error Occurred...
VEHICLES: 2011 JC Journey 2011 JF Journey (Fiat) 2011 LD Charger 2011 LX 300 DESCRIPTION: A USB cable is required to flash the Magneti Marelli HFM ECU. If the cable is not connected when...
View ArticleTPM-RKE Update Process
ISSUE: Customer is unable to update the TPM-RKE Analyzer tool. SOLUTION: Log into DealerCONNECT Click on Service Click on “Tire Pressure Monitor” in the “SERVICE TOOLS & EQUIPMENT” section Click on...
View ArticlewiTECH Diagnostic Application: Supported Operating Systems
The wiTECH Diagnostic Application was rolled out in 2008. At that time wiTECH supported Windows XP and Vista. Windows 7 with either 32- or 64-bit platforms is the current recommended Operating System...
View ArticleUpgrade to Windows 8 Pro for $39.99
DESCRIPTION: Windows has announced via their Windows blog site that starting at general availability (Oct. 26, 2012), if your PC is running Windows XP, Windows Vista, or Windows 7 you will qualify to...
View ArticleBasic Wireless Networking: Laptop Configuration for Windows XP
BASICS All wireless networks have a Network Name/ (SSID) that is automatically broadcast from most wireless routers and access points, so that any wireless device within the broadcast range can pick up...
View ArticlewiTECH Diagnostic Application Prevents/Warns the User that the Device Is Not...
DESCRIPTION Users with currently registered devices may receive the Registration Required/Warning pop-up message as depicted in the screenshots below despite their device is registered: ...
View Article2014 BF DDCT with ISO Code BC074C0DF1
DESCRIPTION When running any of the following TCM Misc. Functions: Bleed Hydraulic Circuit Learn Clutches Contact Point New Actuators Reset of Data Group Quick Learn PROCEDURE Time for Power Latch was...
View ArticleUnable to Update/Install wiTECH 14.03.20, Error: "wiTECH System requires...
DESCRIPTION If you have installed the version 13.0.0.83 of Adobe AIR when prompted by wiTECH Diagnostic Application, you will run into issues when attempting to update to the latest version of wiTECH...
View ArticleStarMOBILE Desktop Client Application support has been discontinued....
Description: StarMOBILE Desktop Client Application is no longer supported. Due to TechAuthority system upgrades, aftermarket users that are still using the StarMOBILE Desktop Client application may...
View ArticleHow to report missing DTC-based Service Diagnostic Procedure Information
DESCRIPTION The Diagnostic Trouble Codes (DTCs) that are displayed in the wiTECH Diagnostic Application are being reported by the ECU indicating a condition occurring on the vehicle. The service...
View Article